Can be used as a replacement battery for the Andis AGR+ Clipper, or you can go cordless on the Andis AGRC Power Groom Clipper, which is needed to aid in transforming into a cordless clipper.
The heavy-duty battery pack is designed to be removed from the clipper housing for the purposes of re-charging. You can also re-charge the battery with it still attached to the clipper hand piece. To remove the battery from the handpiece simply depress the button immediately beneath the on/off switch. (see clipper diagram) The battery can now be gently pulled apart. When connecting the battery pack to the clipper housing ensure that it is pushed well home - you will see the button depress before returning to its normal position. There should be no gap between the battery pack and the clipper handpiece casing - this will ensure the correct contact.
When fully charged the battery unit should provide one hour of continuous clip time. Re-charging fully takes from between 45 and 60 minutes. Modern battery packs may take 4/5 periods of re-charge before they hold a full charge - this is normal.
Keep the battery pack unit dry and clean. Do not damage the four terminals. Ensure they are free from dirt, grease or other foreign matter as this can effect the recharge capability of the battery unit. |
Convert your cordless Andis AGRC and AGR+ clipper to corded for endless hours of use. For use with the AGRC Power Groom and AGR+ Rechargeable Clipper. 